How to fix your leaking roof
You can get a watertight roof after a simple application, no matter how wet it is outside.
Relentless rain or ponding water can prevent or ruin most emergency roof repair solutions, leaving you frustrated as your property continues to be destroyed by the rain.
But Pour N Plug is different from standard emergency roof repairs. With a very high amount of solids, Pour N Plug is able to displace the water on the roof or gutter's surface, meaning it can form a watertight seal around holes and cracks even if they're flooded with water.
Step one to a watertight roof
If possible, try and clean or clear the surface. For ponding water this is going to be a challenge, and isn't essential for a watertight seal. A cleaner surface simply means that the repair can last longer.
Step two: Add the catalyst to Pour N Plug
First off give the solution a stir. Then simply open the pre-weighed catalyst and pour it in. Stir again, ensuring the materials are well mixed. This begins the cure process, and you're one step closer to sealing that leak.
Step three: Applying to ponding water
This is where the name gets to show off. Pour the solution into the water so it forms a mound, then slowly spread with a spatula or flat-ish tool. Spread in such a way that the solution will displace water around the repair. Add more Pour N Plug when required. For cracks and holes, use the reinforcing PolyFab to bridge the gap at this point. After this, add more product to completely cover the matting.
Step four: Applying to a regular surface
With the catalyst added and the solution stirred, simply pour or spoon onto the surface and spread with a spatula. When covering holes and cracks, apply the solution around over the gaps then press some reinforcing Polyfab onto the coating. Follow this with more Pour N Plug, completely sealing the area.
Step five: Sit back and relax
Enjoy a watertight seal and don't fear the rainclouds. Plus, let us know what you think by leaving a product review.